Automotive Diagnostics 

How to Reset TPMS on Hyundai Alcazar: 3 Easy Methods (2026 Guide)

• September 09, 2026
✎ Edit Article
Learn how to reset the TPMS on your Hyundai Alcazar. Step-by-step guide for automatic drive cycle, reset button, and steering wheel menu methods. Fix the warning light fast.

Published: June 26, 2026

Quick Answer: How to Reset the TPMS on a Hyundai Alcazar

The fastest way to reset the tire pressure monitoring system on a Hyundai Alcazar is to inflate all tires to the recommended PSI (found on the driver’s door jamb sticker), then drive steadily above 30 mph (50 km/h) for 10–20 minutes. The system recalibrates automatically and the warning light turns off. If the light persists, use the TPMS reset button under the steering wheel or inside the glove box, or navigate the instrument cluster menu to select “Calibrate.”

When Should You Reset the TPMS?

Knowing when to perform a reset helps you avoid unnecessary worry or a false sense of security. You typically need to reset the system under these conditions:

  • After adjusting tire pressure – Any time you inflate or deflate tires to the correct cold pressure, the system needs to learn the new values.
  • After rotating tires – The indirect system tracks each wheel’s rotation. Rotating tires changes those patterns, so a reset helps the system adjust.
  • After changing or replacing tires – Including switching between summer and winter tire sets.
  • After a TPMS warning light appears – Whether the light is solid (low pressure) or blinking (system fault), a reset is often the first troubleshooting step.
  • After a battery disconnect – If you’ve disconnected the car battery, the system may lose calibration and require a drive cycle to relearn.

Method 1: Automatic Reset (Drive Cycle)

The Hyundai Alcazar typically uses an indirect TPMS system on base and mid-trims, which relies on the anti-lock brake wheel speed sensors rather than physical pressure sensors inside the tires. For this type of system, a simple drive cycle is the primary reset method.

Step-by-Step Process:

  1. Inflate all tires to the correct pressure. Check the sticker inside the driver’s door jamb. For the Alcazar, the recommended cold pressure is usually 33 PSI for the front tires and 35 PSI for the rear tires, but always verify your specific vehicle’s sticker.
  2. Turn the ignition ON by pressing the engine start button once without pressing the brake pedal. Do not start the engine yet.
  3. Drive the vehicle. Take the car on a road where you can maintain a steady speed of at least 30 mph (50 km/h) for 10 to 20 minutes. Avoid heavy traffic or frequent stops during this cycle.
  4. Observe the TPMS light. It should turn off during or shortly after the drive once the system recalibrates. If it stays on, move to Method 2.

Pro Tip: For the automatic reset to work, the tires must be at the correct cold pressure. If you inflate them after driving (warm tires), the reading will be higher than actual cold pressure, and the system may reject the reset.

Method 2: Using the TPMS Reset Button

If the automatic method fails, or if your Alcazar features a direct TPMS system (with physical sensors inside the tires), a dedicated reset button is necessary.

Locating the Button:

The TPMS reset button is typically located in one of these spots on the Hyundai Alcazar:

  • Under the steering wheel – Look for a small button with a tire cross-section icon or the letters “TPMS” below the dashboard, near the fuse panel.
  • Inside the glove box – On some trims, it’s on the left side of the glove box when you open it.
  • Near the steering column – Check the lower left panel next to the hood release lever.

Step-by-Step Process:

  1. Turn the ignition ON. Press the engine start button to the “ON” position without starting the engine.
  2. Press and hold the TPMS reset button. Hold it for about 3–5 seconds. The TPMS indicator light on the dashboard should blink three times and then turn off.
  3. Release the button immediately after the light blinks.
  4. Start the engine and drive the vehicle for a few minutes to confirm the warning light does not reappear.

If the light blinks three times but stays on after releasing, repeat the procedure. If it still fails, there may be a sensor fault or a persistent low-pressure condition.

Method 3: Resetting via the Steering Wheel Menu (Instrument Cluster)

On higher trims of the Hyundai Alcazar (e.g., Signature, Platinum), you can perform the reset directly through the driver’s information display without needing a physical button.

Step-by-Step Process:

  1. Inflate tires to the correct cold pressure as listed on the door jamb sticker.
  2. Access the settings menu using the “MODE” button on the right side of the steering wheel. Scroll through the instrument cluster menus until you find “User Settings” or “Vehicle Settings.”
  3. Select “TPMS” or “Tire Pressure” using the scroll wheel.
  4. Choose “Calibrate.” Press and hold the “OK” button for 2–3 seconds.
  5. Confirm the calibration. A message such as “Tire Pressure Calibrated” or “Tire Pressure Monitor is being calibrated” will appear on the display.
  6. Drive the vehicle for a few minutes above 15 mph (24 km/h) to complete the learning process.

Note: This method works only when the system is in a state that accepts calibration. If the TPMS warning light is flashing (indicating a fault), the “Calibrate” option may be grayed out. You’ll need to address the fault first.

Troubleshooting: Why Won’t the TPMS Reset?

If you’ve followed all three methods and the TPMS light remains stubbornly on, check these common issues.

Common Issues and Fixes:

  • Incorrect tire pressure – Double-check all four tires with a reliable gauge. Over-inflation or under-inflation by even 2 PSI can prevent the system from accepting the reset.
  • Slow leak – One or more tires may be losing pressure gradually. Use a soapy water spray to check for small punctures or valve stem leaks.
  • Faulty TPMS sensor (direct systems) – If the light blinks for 60–90 seconds before staying solid, it indicates a sensor with a dead battery or a lost sensor ID. This requires a professional scan tool like a Launch X431 to diagnose and reprogram.
  • Sensor battery life – TPMS sensor batteries typically last 5–10 years. If your Alcazar is older or has high mileage, one of the sensors may be dying.
  • Aftermarket electronic interference – Dashcams, LED lights, or phone chargers plugged into the OBD port can sometimes interfere with TPMS signals. Try temporarily removing any aftermarket accessories.
  • Tire size change – If you’ve installed non-standard tire sizes, the indirect system may never learn the new rolling radius correctly. Revert to OEM sizes or perform a longer drive cycle (30+ minutes).
  • System not learning a rotation (indirect TPMS) – After a tire rotation, the indirect system needs to relearn each wheel’s position. Drive for a full calibration cycle of 20 minutes at steady highway speed.

Frequently Asked Questions (FAQ)

How long does it take for the TPMS light to go off after resetting?

For an automatic drive-cycle reset, the light typically turns off within 10 to 20 minutes of continuous driving above 30 mph. If you use the reset button or steering wheel menu, the light should go off immediately after the blink sequence, but a short drive confirms the fix.

Can I drive my Hyundai Alcazar with the TPMS light on?

Yes, you can drive short distances, but it’s not recommended. A solid light means at least one tire is significantly underinflated, which reduces fuel economy, causes uneven tire wear, and increases the risk of a blowout. A blinking light indicates a system malfunction; you may still have correct pressure, but the system won’t alert you if pressure drops later.

Why is my TPMS light still on after inflating the tires?

This is common. The system needs a manual reset to “learn” the new pressure. Try the drive cycle (Method 1) first, then the reset button (Method 2). If the light remains, check for a slow leak using a tire gauge after 24 hours, or have a shop scan for sensor faults.

Do I need a special tool to reset the TPMS on a Hyundai Alcazar?

No, for routine resets after inflation or rotation, the onboard methods described above are sufficient. However, if you replace a TPMS sensor, you will need a TPMS relearn tool or a professional diagnostic scanner to register the new sensor ID to the vehicle’s ECU.

What is the correct tire pressure for a Hyundai Alcazar?

The recommended cold tire pressure is listed on the sticker inside the driver’s door jamb. For the Alcazar with 17-inch or 18-inch wheels, it is typically 33 PSI (front) and 35 PSI (rear) . Always verify your own sticker, as it may vary by trim and market.

Will disconnecting the battery reset the TPMS?

Disconnecting the battery can sometimes clear the system memory and turn off a minor warning light. But the system will still require a drive cycle (10–20 minutes at steady speed) to relearn the tire positions and pressure values. This method is not reliable for a persistent fault.

About the Author: Erwin Salarda is an Automotive Service Equipment Technician based in the Philippines, specializing in computerized automotive diagnostic equipment such as OBD scanners and wheel alignment systems. Since 2012, he has been actively providing technical support, equipment installation, troubleshooting, after-sales service, and hands-on training for automotive service equipment used by workshops and automotive professionals.

He has received specialized training from international suppliers and manufacturers, including Launch X431 in Shenzhen, China, Lawrence Engineering Company in Guangzhou, China, and 3Excel Wheel Alignment Company in Shenzhen, China. Through these trainings, he developed advanced expertise in automotive diagnostics, calibration, wheel alignment systems, and computerized automotive service technologies.

Erwin Salarda provides professional after-sales support and technical training for automotive diagnostic and wheel alignment equipment, helping clients maximize the performance and proper use of their tools and systems. His experience covers equipment setup, software updates, calibration procedures, troubleshooting, and operational guidance for automotive workshops and service centers.

With more than a decade of experience in the automotive equipment industry, Erwin Salarda continues to support automotive businesses by delivering reliable technical expertise and practical training solutions.

For inquiries and equipment purchases, please visit https://carlifterph.com/

Related Posts