Learn how to reset TPMS on Hyundai Aura with this easy step-by-step guide. Includes button location, automatic relearn, troubleshooting, and FAQs. Fix the low tire pressure light today!

How to Reset TPMS on Hyundai Aura

Last Updated: June 26, 2026

Quick Answer: How to Reset TPMS on Hyundai Aura

Press and hold the TPMS reset button (located under the steering wheel, near the fuse box or left of the steering column) with the ignition in the ON position (engine off or running) until the low tire pressure light blinks three times, then release. Drive the car above 25 mph (40 km/h) for about 10 minutes to complete the recalibration. If the light remains on, check and adjust tire pressures to the recommended PSI on the driver’s door jamb, then repeat the procedure.

Introduction: Why Proper TPMS Reset Matters

Your Hyundai Aura’s Tire Pressure Monitoring System (TPMS) is a critical safety feature that alerts you when one or more tires drop below the recommended pressure. Driving with underinflated tires reduces fuel efficiency, causes uneven tread wear, and increases the risk of a blowout. But resetting the TPMS isn’t just about turning off an annoying dashboard light—it ensures the system continues to monitor pressures accurately.

Common scenarios that trigger the TPMS warning light in the Hyundai Aura include:

Seasonal temperature changes (cold weather drops tire pressure by about 1 PSI per 10°F)
Tire rotation or replacement
Installing new TPMS sensors
Simply inflating tires to the correct pressure after they were low

If you don’t reset the system correctly, the warning light may stay on or, worse, fail to alert you to a genuine low-pressure situation. This guide walks you through every method to reset TPMS on Hyundai Aura, from the standard button-based procedure to automatic relearn for newer models.

Understanding TPMS in Hyundai Aura

The Hyundai Aura uses a direct TPMS system. That means each wheel has a dedicated sensor mounted inside the tire (attached to the valve stem) that measures actual air pressure and temperature. These sensors transmit data wirelessly to the car’s ECU.

When pressure drops below the threshold (typically 25% below the recommended PSI), the sensor sends a signal that illuminates the TPMS warning icon on your dashboard—a yellow exclamation mark inside a tire cross-section.

Direct vs. Indirect TPMS – Why It Matters

Unlike indirect systems that estimate pressure from wheel speed sensors, direct TPMS gives you precise readings. However, it also means the sensors have batteries that eventually die (usually after 5–7 years) and must be replaced as a sealed unit. If a sensor fails, the TPMS light will blink for 60–90 seconds after starting the engine, then stay on solid.

Typical Causes of TPMS Light Illumination in Hyundai Aura

Temperature drops: Cold weather contracts air, triggering the light even if tires were properly inflated in summer.
Tire rotation: If sensors move to different wheel positions, the car may not recognize them without a relearn.
New tires or sensors: After installation, the system needs to register new sensor IDs.
Slow leaks: A nail or puncture can cause gradual pressure loss over days.
After inflating tires: Simply adding air doesn’t always turn off the light—you need to reset.

Step-by-Step Guide: How to Reset TPMS on Hyundai Aura

Most Hyundai Aura models—especially those from 2020 onward—use a manual reset button. Follow these steps carefully.

1. Check and Inflate All Tires to Recommended Pressure

Before attempting any reset, verify that every tire is at the correct pressure. Locate the sticker on the driver’s door jamb. For the Hyundai Aura, the recommended pressure is typically 33 PSI for both front and rear tires, but confirm for your specific model year.

Use a reliable tire pressure gauge.
Inflate when tires are cold (car hasn’t been driven for at least 3 hours).
Check all four tires, including the spare if equipped with a sensor.

2. Locate the TPMS Reset Button

In most Hyundai Aura models, the TPMS reset button is located:

Under the dashboard, left of the steering column
Near the hood release lever
Behind a small flap or near the fuse panel cover

The button may be labeled “TPMS” or “SET” and often has a tire cross-section icon. In some trims, it’s a recessed button you press with a pen tip.

If you cannot find it: Check the owner’s manual or look behind the fuse panel cover—sometimes the button is hidden there.

3. Turn Ignition to ON Position (Engine Off)

Insert the key and turn to the ON position (do not start the engine). For push-button start models, press the Start button twice without pressing the brake pedal. You should see all dashboard warning lights come on.

4. Press and Hold the Reset Button

Press and hold the TPMS reset button for about 3 to 5 seconds. Watch the TPMS indicator light on the dashboard:

It should blink three times and then turn off.
On some models, it may flash briefly or stay solid for a moment before going dark.

What if nothing happens? Ensure the ignition is in ON (not ACC mode). If the button still doesn’t respond, your vehicle may use automatic reset (see alternative methods below).

5. Release Button and Start the Engine

After the light blinks, release the button and start the engine. The TPMS light should be off. If it remains on solid, proceed to step 6.

6. Drive to Complete Relearn Process

Even after the button reset, the system needs a driving cycle to reregister sensor IDs and confirm pressure values.

Drive the vehicle above 25 mph (40 km/h) for 10 to 20 minutes on a straight road.
The TPMS indicator should stay off after this drive.
If it comes back on, repeat the entire procedure.

Alternative Reset Methods for Hyundai Aura

Not all Aura trims have a physical reset button. Here are other ways to reset the TPMS.

Using the Driver Information Display (for models with MID menu)

Some higher trims of the Hyundai Aura allow reset through the multi-information display.

Press the Mode button on the steering wheel to scroll to the TPMS or Tire Pressure screen.
Press and hold the OK or Set button until the TPMS light blinks.
Release, then drive above 25 mph for 10 minutes.

Automatic Reset (no button models – typically 2021+ Aura)

Newer Hyundai Aura models may omit the reset button entirely. The system relearns automatically.

Inflate all tires to the correct pressure (check door jamb sticker).
Drive the car above 25 mph (40 km/h) for about 10 minutes.
The TPMS light should turn off by itself once the sensors are recognized.

No button pressing required. If the light persists after driving, there may be a sensor issue or a leak.

Using a TPMS Relearn Tool (for sensor replacement or rotation)

When you replace TPMS sensors or rotate tires on a direct TPMS system, the car needs to learn which sensor is at which wheel position. A dedicated TPMS relearn tool (like Autel, Bartec, or OEM Hyundai tool) can trigger each sensor.

Place the tool near the valve stem of each tire.
Follow the tool’s instructions to activate the sensor (usually a horn honk or light flash confirms).
Repeat for all four tires in the correct order (typically LF, RF, RR, LR).

When is this required? After replacing sensors with new ones, or if you swap wheels front-to-back and the car doesn’t automatically reassign positions. Professional assistance is recommended if you don’t have a relearn tool.

Troubleshooting: TPMS Light Still On After Reset

Here’s a quick reference table for common issues:

Symptom	Possible Cause	Fix
Light blinks for 60–90 seconds then stays on	Sensor failure or dead battery	Replace the sensor (typically 5–7 year lifespan)
Light returns after driving for a few days	Slow leak or pressure discrepancy	Reinspect tires for punctures; recheck pressures cold
Light stays solid after fresh inflation and reset	Incorrect reset procedure or system fault	Repeat steps slowly; try driving longer or use a relearn tool
No reset button found	Model uses automatic reset or button is hidden	Check owner’s manual; look behind fuse panel cover
Aftermarket tires/wheels installed	Incompatible or missing sensors	Install correct OEM-style or programmable TPMS sensors (433 MHz for Hyundai Aura)
Light works but no pressure shown in MID	Sensor not communicating or needs programming	Relearn with tool; if still no reading, sensor may be defective

Why is my Hyundai Aura TPMS light blinking?

A blinking TPMS light (usually for 60–90 seconds after startup) indicates a sensor malfunction, not low pressure. This could mean a dead sensor battery, a damaged sensor, or a communication error. Each sensor has a sealed battery that cannot be replaced—you must replace the entire sensor.

When to Seek Professional Help

While resetting the TPMS on your Hyundai Aura is a straightforward DIY task, some situations require a mechanic or tire shop:

The TPMS light stays on after multiple reset attempts – There may be a sensor fault or wiring issue.
You need to replace or rotate tires and don’t have a relearn tool – Tire shops can perform a relearn in minutes.
Suspected faulty TPMS sensor or module – If the light blinks consistently, a sensor replacement is needed (around $50–$100 per sensor plus labor).
Check engine light appears alongside TPMS light – Could indicate a broader vehicle system issue.

For professional assistance, any Hyundai dealership or reputable tire shop can diagnose and reset the system.

Frequently Asked Questions (FAQ)

Why is my Hyundai Aura TPMS light on even after inflating tires?

Inflating tires doesn’t automatically turn off the TPMS light on most Hyundai Aura models. You need to perform a manual reset (press and hold the TPMS button) or drive the car above 25 mph for 10 minutes to trigger the automatic relearn. If the light stays on after that, there may be a sensor error or a slow leak that requires inspection.

How long does a TPMS battery last in Hyundai Aura?

TPMS sensor batteries in the Hyundai Aura typically last 5 to 7 years. The sensor is a sealed unit, so when the battery dies, you must replace the entire sensor. Signs of a dying battery include intermittent TPMS warnings or a blinking light after startup.

Can I reset TPMS without the button?

Yes. On newer Hyundai Aura models (2021 and later), there is often no reset button. Simply inflate all tires to the correct pressure and drive above 25 mph for 10–15 minutes. The system automatically relearns the sensors and turns off the warning light. For older models without a button, check your owner’s manual—some have a hidden button behind the fuse panel.

Does tire rotation require a TPMS reset?

It depends. If the TPMS sensors are moved to different wheel positions (e.g., front tires to rear), the car may still show pressure readings but in the wrong position. To reassign sensor positions correctly, you typically need a TPMS relearn tool. However, some Hyundai Aura models automatically relearn after driving a few minutes. If you notice the pressure readings are swapped after rotation, have a shop perform a relearn.

What is the correct tire pressure for Hyundai Aura?

Check the sticker on the driver’s door jamb. For most Hyundai Aura models, the recommended pressure is 33 PSI for both front and rear tires. However, this can vary slightly by model year and trim. Always use the pressure listed on the door jamb, not the maximum pressure printed on the tire sidewall.

Will aftermarket tires or wheels affect TPMS?

Yes. If your aftermarket wheels don’t have TPMS sensors installed, or if they use sensors with a different frequency (the Hyundai Aura typically uses 433 MHz), the TPMS light will flash. You can install programmable or OEM-compatible sensors in aftermarket wheels. Make sure the sensors are programmed to match your car’s system. A tire shop can handle this.

The TPMS button does nothing – what now?

First, confirm the ignition is in the ON position, not ACC mode. If the button still doesn’t respond, your Aura model may not have a physical reset button (common in newer trims). Try the automatic drive cycle method: inflate tires, drive above 25 mph for 10–15 minutes. If that fails, consult your owner’s manual or visit a dealer to see if a hidden button exists.

Conclusion

Resetting the TPMS on your Hyundai Aura is a simple task once you know the correct procedure. The key steps are:

Inflate all tires to the recommended PSI (check driver’s door jamb).
Locate the TPMS button under the dash (or use the automatic method).
Press and hold with ignition ON until the light blinks three times.
Drive above 25 mph for about 10 minutes to complete the relearn.

Regular tire pressure checks and accurate TPMS resetting help maintain fuel economy, extend tire life, and keep you safe on the road. If the warning light persists despite following these steps, don’t ignore it—have the system inspected by a professional.

For more details on your specific model year, refer to your Hyundai Aura owner’s manual or visit a trusted service center.

For additional guidance on Hyundai TPMS issues, check out our guide on [link to related guide on similar topic like "How to Reset TPMS on Hyundai i10"].

About the Author: Erwin Salarda is an Automotive Service Equipment Technician based in the Philippines, specializing in computerized automotive diagnostic equipment such as OBD scanners and wheel alignment systems. Since 2012, he has been actively providing technical support, equipment installation, troubleshooting, after-sales service, and hands-on training for automotive service equipment used by workshops and automotive professionals.

He has received specialized training from international suppliers and manufacturers, including Launch X431 in Shenzhen, China, Lawrence Engineering Company in Guangzhou, China, and 3Excel Wheel Alignment Company in Shenzhen, China. Through these trainings, he developed advanced expertise in automotive diagnostics, calibration, wheel alignment systems, and computerized automotive service technologies.

Erwin Salarda provides professional after-sales support and technical training for automotive diagnostic and wheel alignment equipment, helping clients maximize the performance and proper use of their tools and systems. His experience covers equipment setup, software updates, calibration procedures, troubleshooting, and operational guidance for automotive workshops and service centers.

With more than a decade of experience in the automotive equipment industry, Erwin Salarda continues to support automotive businesses by delivering reliable technical expertise and practical training solutions.

For inquiries and equipment purchases, please visit https://carlifterph.com/

How to Reset TPMS on Hyundai Aura | Step-by-Step Guide (2026)