Automotive Diagnostics 

How to Reset Oil Service on Hyundai Reina with LAUNCH X431

• June 28, 2026
Learn how to reset the oil service light on a Hyundai Reina using a LAUNCH X431 scanner. Step-by-step guide, troubleshooting, and maintenance tips.

Published: June 27, 2026

Quick Answer

Resetting the oil service light on a Hyundai Reina using a LAUNCH X431 takes about 2–3 minutes. Connect the scanner to the OBD-II port under the driver’s dashboard, turn the ignition ON, navigate to “Service Reset” under the Hyundai menu, follow the on-screen prompts, and confirm the reset. No extra tools are required, and the light should disappear after verifying.

Why Perform an Oil Service Reset?

The oil service light — often labeled “OIL” or shown as a wrench icon — is a maintenance reminder, not a fault warning. It triggers based on mileage or time since the last reset, not on actual oil condition. Performing an oil change is only half the job; resetting the reminder ensures the system tracks the next service interval correctly.

What happens if you skip the reset?

  • The warning light stays on continuously or flashes at startup, which can be distracting.
  • The next service reminder will be based on the old interval, making it inaccurate or causing it to come on too early or too late.
  • If you sell the vehicle, the persistent light may confuse the buyer or suggest neglect.

A proper reset aligns the vehicle’s computer with the maintenance just performed. It’s a simple but essential step that keeps the Hyundai Reina’s service schedule on track.

Prerequisites Before Starting

Before you begin, take a moment to check these conditions:

  • Vehicle state: Engine off, ignition off, keys in your hand. Do not start the engine during the reset procedure.
  • LAUNCH X431 readiness: Ensure the scanner is fully charged or connected to a power source. More importantly, verify that its software is up to date — outdated firmware may not have the correct reset sequence for the Reina. Connect to Wi-Fi and run the update app if needed.
  • OBD-II port location: On the Hyundai Reina, the port is under the driver’s side dashboard, near the fuse panel and to the left of the steering column. It’s a trapezoidal 16-pin connector.
  • Vehicle compatibility: Most LAUNCH X431 models (X431 V, PRO, PAD, etc.) support the Hyundai Reina from 2014 to 2020. Some regional variants may also be listed under “Hyundai Grand i10” — double-check your specific model year.

Tip: If you’re unsure about your tool’s compatibility, the X431 can auto-detect the vehicle by scanning the VIN. That feature is covered in the steps below.

Step‑by‑Step Guide: Reset Oil Service Using LAUNCH X431

Follow these seven steps carefully. If you get stuck, refer to the troubleshooting section later.

1. Connect the LAUNCH X431 to the Vehicle

Locate the OBD-II port and plug the diagnostic cable in securely. A firm click confirms the connection. Turn the ignition to the ON position (engine off). The dashboard lights should illuminate, and the scanner will power up automatically.

2. Choose the Vehicle Profile

On the X431 home screen, tap Diagnosis. From the vehicle list, select Hyundai, then scroll to Reina or Grand i10 (depending on the software version).
Alternatively, use the VIN Scan function — the tool reads the vehicle identifier and loads the correct profile automatically. This is the most reliable method if you’re unsure of the exact model designation.

3. Access the Service Reset Menu

Once the vehicle information is confirmed, you’ll see the main diagnostic menu. Look for one of these options:

  • Service Reset
  • Maintenance Reset
  • Oil Reset
  • Service Light Reset (SRI)

The exact wording varies by X431 version, but they all lead to the same function. Tap it.

4. Follow the On‑Screen Prompts

The tool now displays a step-by-step wizard. Typically it will:

  • Ask you to confirm the current oil life or mileage since last service.
  • Present a Reset button or a Yes/No confirmation.
  • Show the new interval distance (e.g., 15,000 km or 12 months). Accept the default unless your manual says otherwise.

Tap Reset or Yes. Wait for the progress bar to complete. A message like “Reset Successful” confirms the operation.

5. Verify the Reset

Turn the ignition OFF, wait 10 seconds, then turn it back ON. Check the instrument cluster — the oil service light should be gone.

Note: Some Reina models display a countdown or “Service in — — km” message. That too should return to the full interval.

6. (Optional) Perform a System Scan

While the X431 is connected, it’s good practice to run a Read Codes scan. This checks for any stored trouble codes related to the engine or oil system. If you see codes like P0520 (oil pressure sensor circuit), address them separately — the reset won’t fix those.

7. Disconnect the Tool

Turn the ignition OFF, unplug the X431, and store it safely. The reset is complete.

Troubleshooting Common Issues

Even with a well-maintained X431, hiccups can happen. Here’s how to handle the most frequent problems.

Tool Does Not Connect

  • Check the cable: Ensure the OBD-II connector is fully inserted. A loose connection prevents communication.
  • Ignition position: Must be ON (engine off). If the tool doesn’t power on, the ignition may be in the ACC position — turn it one click further.
  • Software update: Outdated firmware can cause handshake failures. Connect to Wi-Fi and update before trying again.
  • Adapter issues: If you’re using an extension cable or a 6-pin to 16-pin adapter, remove it and connect directly.

No “Oil Reset” Option Found

  • Look deeper: On some X431 versions, the service reset function lives under Special Functions rather than the main menu.
  • Wrong vehicle selection: The Reina is sometimes listed under “Hyundai Grand i10” for certain markets. Try that.
  • Software too old: Update the X431 — newer software versions include more comprehensive reset routines.

Reset Performed but Light Returns

  • Actual problem exists: The light may indicate low oil level, faulty oil pressure sensor, or overdue maintenance. Check the dipstick and oil pressure with a mechanical gauge. Use the X431’s Read Codes function to pull any diagnostic trouble codes (DTCs).
  • Interval not fully cleared: A few Hyundai models require two consecutive resets. Repeat the steps once more.
  • Manual override: If the X431 method fails, try the dashboard button combination described in the alternative methods section below.

Vehicle Not Recognized by X431

  • Force VIN scan: The X431 can auto-identify any vehicle by scanning the VIN. This bypasses manual selection errors.
  • Manual selection by year: Choose “Hyundai” → “2015” or “2017” depending on your Reina’s model year, then select the engine type.
  • Contact support: If the vehicle still won’t connect, visit the LAUNCH support website and check the compatibility list. You may need a different adapter or software module.

Alternative Methods (If LAUNCH X431 Is Not Available)

Sometimes the X431 isn’t handy. Here are other ways to reset the oil service light on a Hyundai Reina.

  • Dashboard button method:
    Turn the ignition OFF. Press and hold the Trip Reset button (on the instrument cluster). While holding, turn the ignition ON. Continue holding for about 5–10 seconds until the oil light blinks and then turns off. Release the button. This works on many Hyundai models, but not all — test it first.

  • Generic OBD-II scanner:
    Basic code readers often lack the Service Reset function. Only advanced or manufacturer-specific tools can perform this. If you have an ELM327-based scanner, compatible software like Car Scanner or Torque Pro may have a “Reset Service Light” option, but results vary.

  • Dealer or professional shop:
    A Hyundai dealer uses the GDS (Global Diagnostic System) to reset the light in seconds. Independent mechanics with OEM-level scan tools can do it too. Expect a small service fee.

Maintenance Tips to Extend Engine Life

Resetting the light is just one part of keeping your Reina healthy. Follow these recommendations for long-term performance.

Item Recommendation
Oil type 5W-30 full synthetic or semi-synthetic (check your owner’s manual for exact specification)
Oil capacity Typically 3.5 to 4.0 liters (with filter)
Change interval 7,500–10,000 km under normal conditions; 5,000 km under severe conditions (short trips, dusty roads, heavy traffic)
Other fluids Check coolant, brake fluid, and transmission fluid at every oil change
Reset importance Always reset the service light after each oil change to maintain accurate tracking

Why this matters: The Hyundai Reina’s engine (1.4L Kappa) is robust, but it relies on timely oil changes to prevent sludge buildup. A correctly reset reminder ensures you never miss a service interval by accident.

Frequently Asked Questions (FAQ)

Can I reset the oil service light without a LAUNCH X431?

Yes, some Hyundai Reina models allow a manual reset using the instrument cluster buttons. If that doesn’t work, the LAUNCH X431 is the most reliable aftermarket tool for a guaranteed reset.

Why does the oil light stay on after resetting with X431?

Possible causes include low oil level, a faulty oil pressure sensor, or an actual maintenance interval that was missed. Run a diagnostic scan first to check for trouble codes. If the light still remains, try the reset a second time.

Is the LAUNCH X431 compatible with all Hyundai Reina years?

Most X431 versions support 2014–2020 Reina models. Always update the software before use, and if your year falls outside that range, consult the LAUNCH compatibility chart.

How often should the oil service reset be performed?

Only after completing an oil change. Resetting the light without replacing the oil will make the maintenance schedule inaccurate and could lead to extended oil change intervals.

What if I accidentally selected the wrong vehicle model?

Disconnect the tool, turn the ignition off, wait 30 seconds, and reconnect. Re‑select the correct Hyundai Reina model. If the tool still shows the wrong profile, perform a VIN auto-scan to force the correct identification.

Will resetting the service light clear trouble codes?

No, it only resets the service interval reminder. Use the “Read Codes” function separately to check for diagnostic trouble codes related to the engine or oil system.

Can I use the LAUNCH X431 oil reset function on other Hyundai models?

Yes, the tool supports many Hyundai/Kia vehicles, but the menu path may differ. The same general procedure applies — select the model, find Service Reset under Special Functions, and follow the prompts.

How do I update my LAUNCH X431 software?

Connect to Wi-Fi, open the “Update” app on the X431, and follow the on‑screen prompts. Ensure the battery is at least 50% charged before starting the update to avoid interruptions.

Do I need to disconnect the battery before resetting?

No, simply turning the ignition ON is sufficient. Disconnecting the battery is unnecessary and may cause other systems to lose memory settings (e.g., radio presets, clock).

What if the LAUNCH X431 crashes during the reset process?

Turn the ignition OFF, restart the tool, and try again. If the problem persists, contact LAUNCH support for further assistance. It may indicate a software bug that requires a patch.

About the Author: Erwin Salarda is an Automotive Service Equipment Technician based in the Philippines, specializing in computerized automotive diagnostic equipment such as OBD scanners and wheel alignment systems. Since 2012, he has been actively providing technical support, equipment installation, troubleshooting, after-sales service, and hands-on training for automotive service equipment used by workshops and automotive professionals.

He has received specialized training from international suppliers and manufacturers, including Launch X431 in Shenzhen, China, Lawrence Engineering Company in Guangzhou, China, and 3Excel Wheel Alignment Company in Shenzhen, China. Through these trainings, he developed advanced expertise in automotive diagnostics, calibration, wheel alignment systems, and computerized automotive service technologies.

Erwin Salarda provides professional after-sales support and technical training for automotive diagnostic and wheel alignment equipment, helping clients maximize the performance and proper use of their tools and systems. His experience covers equipment setup, software updates, calibration procedures, troubleshooting, and operational guidance for automotive workshops and service centers.

With more than a decade of experience in the automotive equipment industry, Erwin Salarda continues to support automotive businesses by delivering reliable technical expertise and practical training solutions.

For inquiries and equipment purchases, please visit https://carlifterph.com/

Related Posts