Perodua Programming 

How to Program Perodua Axia Keys Using LAUNCH X431 | Step-by-Step Guide

• June 21, 2026
Learn to program Perodua Axia keys with LAUNCH X431. Step-by-step guide, requirements, troubleshooting tips, and FAQs for DIY key programming.

Quick Answer: Can You Program Perodua Axia Keys Using LAUNCH X431?

Yes, you can program Perodua Axia keys using LAUNCH X431 diagnostic tools. The process takes about 5–10 minutes, requires at least one existing working key, and involves connecting the scanner to the OBD-II port, accessing the immobiliser system, and following on-screen prompts. No professional locksmith training is needed, but you need a compatible blank key and a valid security PIN.

What You’ll Need Before Starting

Before diving into the procedure, gather the following items to avoid interruptions:

  • LAUNCH X431 scanner (X431 Pro, X431 PAD, X431 V+, or any current model) with the latest software updates installed.
  • Perodua Axia (2014–present, any model year or facelift).
  • At least one existing, working master key – this is essential to authorise the immobiliser system.
  • A new blank transponder key cut to match your vehicle’s lock (ID46 chip type).
  • Car battery at 12V or above – low voltage can interrupt the programming process.
  • Internet connection – needed for software downloads and PIN code retrieval (if you don’t already have the PIN).

Pro tip: If you’re unsure whether your LAUNCH X431 supports the Axia, check the manufacturer’s website or run the “Diagnostics” menu first. Most X431 models with the latest Perodua software packs cover all Axia generations.

Step-by-Step Procedure to Program Perodua Axia Keys Using LAUNCH X431

Follow these steps in order. The scanner handles most of the heavy lifting – you just need to follow each prompt carefully.

Step 1: Prepare Your Vehicle and Scanner

  • Turn off the ignition and remove all keys from the ignition barrel.
  • Connect the LAUNCH X431 to the vehicle’s OBD-II port (located under the dashboard, driver’s side).
  • Power on the scanner and wait for it to boot completely.

Step 2: Select the Correct Model

  • Tap “Diagnostics” on the LAUNCH home screen.
  • Choose “Perodua” from the manufacturer list.
  • Select “Axia” and confirm the engine type (1.0L or 1.3L). If the scanner doesn’t auto-detect, manually enter the VIN.

Step 3: Access the Immobiliser System

  • Navigate to “Immobiliser” or “Security System” (wording varies slightly by software version).
  • The system will request the security PIN code.
    • If you already have the PIN (from your owner’s manual or dealer), enter it.
    • If you don’t, use the LAUNCH’s “PIN Code Retrieval” function (requires an active subscription and internet connection).

Step 4: Choose the Key Programming Function

Once inside the immobiliser menu, you’ll see options like:

  • Add New Key – use this to program a fresh key while keeping existing keys.
  • Delete All Keys – only use if you are replacing all keys (e.g., after losing one).
  • Learn New Key – some software versions list this instead.

Select “Add New Key” unless you have a specific reason to delete everything.

Step 5: Follow the On-Screen Prompts

  • The scanner will instruct you to insert the existing working key into the ignition and turn it to the ON position (do not start the engine).
  • Wait for the scanner to confirm communication with the existing key.
  • Remove the working key after confirmation.
  • Insert the new blank key into the ignition and turn to ON.
  • The scanner will automatically recognise and program the new key.
  • You’ll see a success message like “Key Learned Successfully”.

Step 6: Verify All Keys Work

  • Remove the new key and test both the existing and new keys:
    • Lock/unlock the doors using the remote button.
    • Start the engine with each key.
  • If any key fails, repeat the process or check battery connections.

Troubleshooting tip: If the new key isn’t recognised, verify it’s an ID46 transponder chip key – some cheap aftermarket blanks require cloning first.

Common Issues & How to Fix Them

Even with a straightforward procedure, things can sometimes go wrong. Here’s a quick reference table:

Problem Likely Cause Solution
Scanner cannot connect to immobiliser Low battery voltage Charge battery to 12.5V+ and retry
PIN code request without access PIN not set or incorrect Use “PIN Code Retrieval” (online required)
New key not recognised after steps Key chip type mismatch Confirm key is ID46; use a diagnostic chip tester
Existing keys stop working after adding new key “Delete All Keys” was accidentally selected Re-run programming with original keys
Remote (RF) buttons not working Remote not linked during key learning Some Axia models require separate remote programming – go to “Remote Control Programming” in the scanner menu

Important Precautions

  • Always back up existing key data before attempting to delete all keys. Once deleted, you cannot recover them without a specialised tool.
  • Do not turn off the scanner or remove the OBD cable during programming. Interrupting the process can corrupt the immobiliser unit.
  • If you have only one working key, ensure it’s fully functional before starting. If it fails mid-programming, you may be locked out of your own vehicle.

Frequently Asked Questions

Q1: Can I program a Perodua Axia key without the original working key?
No, the LAUNCH X431 procedure requires at least one existing working key to authorise the immobiliser system. If you have lost all keys, contact a dealer or specialist locksmith for a full system reset.

Q2: Do I need an internet connection to use the LAUNCH X431 for key programming?
Yes, for the initial software download and for PIN code retrieval if you don’t already have the security PIN. Offline functions like “Add Key” work once the data is loaded.

Q3: How much does it cost to program a Perodua Axia key with LAUNCH X431?
If you own the LAUNCH X431 tool, the cost is only for the new blank key (approx. RM 15–50) plus any subscription fees for PIN retrieval (if needed). DIY programming saves RM 100–200 compared to dealer service.

Q4: Which Perodua Axia model years are supported by the LAUNCH X431?
LAUNCH X431 supports all Perodua Axia generations from 2014 to present (including the 2021 facelift). However, ensure your scanner has the latest firmware updates.

Q5: Can I program the remote (fob) functions using the same process?
Not always. The steps above cover transponder (engine start) programming. For remote lock/unlock functions, you may need to access a separate “Remote Programming” menu within the LAUNCH X431. Some Axia models combine both in one step.

Q6: What if the scanner says “Key Already Programmed”?
This means the new key was previously used in another car. You must erase its memory using a transponder chip programmer or purchase a fresh blank key.

Q7: Is it safe to perform key programming myself?
Yes, if you follow the steps carefully. The risk of damaging the immobiliser is very low unless you disconnect the scanner mid-process or use the wrong PIN.

Final Thoughts

Programming a Perodua Axia key with a LAUNCH X431 is a cost-effective, DIY-friendly solution. With the right preparation – a compatible scanner, a valid PIN, and at least one original key – you can complete the job in under 15 minutes. Keep your software updated, store your PIN securely, and you’ll never need to pay a dealer for a basic key replacement again.

For more details on using LAUNCH X431 for other diagnostic tasks, check out our guide on [link to related guide on LAUNCH X431 diagnostics] or see our overview of [link to Perodua vehicle diagnostics with X431]. If you’re considering purchasing a LAUNCH X431, visit [link to official LAUNCH product page] for the latest models and software packs.

About the Author: Erwin Salarda is an Automotive Service Equipment Technician based in the Philippines, specializing in computerized automotive diagnostic equipment such as OBD scanners and wheel alignment systems. Since 2012, he has been actively providing technical support, equipment installation, troubleshooting, after-sales service, and hands-on training for automotive service equipment used by workshops and automotive professionals.

He has received specialized training from international suppliers and manufacturers, including Launch X431 in Shenzhen, China, Lawrence Engineering Company in Guangzhou, China, and 3Excel Wheel Alignment Company in Shenzhen, China. Through these trainings, he developed advanced expertise in automotive diagnostics, calibration, wheel alignment systems, and computerized automotive service technologies.

Erwin Salarda provides professional after-sales support and technical training for automotive diagnostic and wheel alignment equipment, helping clients maximize the performance and proper use of their tools and systems. His experience covers equipment setup, software updates, calibration procedures, troubleshooting, and operational guidance for automotive workshops and service centers.

With more than a decade of experience in the automotive equipment industry, Erwin Salarda continues to support automotive businesses by delivering reliable technical expertise and practical training solutions.

For inquiries and equipment purchases, please visit https://carlifterph.com/

Related Posts